Southeast Foundation and Crawl Space Repair Before & After Photos

Andrew contacted Southeast Foundation & Crawl Space Repair concerned with moisture at his Wilmington, NC home. Southeast Foundation & Crawl Space Repair inspector Brannon met with Andrew to go over the crawl space to find the best solution for his issues. Brannon found that at some point the water level in the crawl space was about 6 inches deep that had caused the crawl space to flood. With the crawl space flooded it had caused issues of moisture getting into the insulation and the wood causing mold and mildew. Our crew installed the CleanSpace Crawl Space Encapsulation System. By installing the CleanSpace Encapsulation System along with a Sump Pump System and a dehumidifier we are able to lower the humidity in the crawl space to under 55% which mold and mildew cannot thrive. Andrew is thrilled with the work that Southeast Foundation & Crawl Space Repair did to protect his home for years to come. 

Michael contacted Southeast Foundation & Crawl Space Repair concerned with a slab of concrete that had sunken around his pool in Wilmington, NC. The concrete had become a trip hazard and Micheal wanted his family to be safe while enjoying the pool during the summer months. Southeast Foundation & Crawl Space Repair inspector Jeremie met with Michael to go over the concrete. With the use of the PolyLevel System, which is a two-part expanding foam that helps lift and support the concrete and make it level. Micheal is thrilled with the work that Southeast Foundation & Crawl Space Repair to help fix the concrete around his pool. 

Due to high moisture levels, the support beam in this crawl space was weakened. Because of the weak beam, the floors above were not adequately stabilized. Our solution to this problem was to install a steel supplemental beam and SmartJack support posts. As a result, the floor was lifted and leveled and permanently stabilized. This ensured the safety of the building, leaving it stronger and more secure than before.

There was a high level of moisture in this crawl space, and it was seeping into the upper levels of the customer's home. The problem was solved by installing CleanSpace vapor barrier, SilverGlo crawl space insulation, and a SaniDry Sedona dehumidifier.  

 Mold and mildew are common in crawl spaces, but the Sedona keeps the relative humidity below 55%, so mold won't stand a chance. As a high-efficiency dehumidifier, the Sedona removes more moisture (100 pints per day) for less electricity cost than conventional models.